Automatic Welding Nozzle Cleaner and Wire-cut Robot
Robomate (RNP-3 RNP-7 PNP-5-VC)
- Body is made of stainless steel.
- Robomate provided proximity sensor to detect welding nozzle which interface isn’t required. It’s easy to set up and can be simultaneously performed with any arc welding robot.
- Robomate can combine to 1 set with nozzle spatter removal, preventive and wire cutting. This set can keep cutting same wire length of wire smoothly, clean welding nozzle and remove spatter inside nozzle.
Spatter removal and spatter preventive liquid coating in the nozzle can be simultaneously performed.
This device adopts the spring type tool uniquely developed. On the strength of the flexibility of the spring, there is no worry that the edge fixture and the nozzle are bit in. The spring is installed by means of one touch. (Low Electric Current)
It is equipped with wire cutting function. Blades are crossed to cut. Therefore, there is no uncut remains. It is possible to use in combination with RNP-3 and RNP-7
|Edge Turning Torque （50/60Hz）||Edge Turing Rate （50/60Hz）||Applicable Nozzle Diameter||Spatter Adhesion-Preventive liquid||Weight （kg ）|
|RNP-3||AC1φ100V 50/60Hz||0.9/0.8N･m||40/48rpm||φ8,10,12～20㎜ ※1||Protekua J||3 ㎏|
|RNP-7||AC1φ100V 50/60Hz||0.1/0.09N･m||1250/1550rpm||φ12,16㎜||Protekua S||3.1㎏|
|Air Source||Applicable Wire||Weight （kg ）|
|RNP-5-VC||AC1φ100V 50/60Hz||0.5MPa（5㎏f/c㎡）||Mild steel Up to max φ1.6㎜||2.5㎏|